Choose your setup. Request a quote in USD. Online ordering is not available.

Ordering a Fill Port Cover? Identify the Plug, Coupling or Valve First

a dust cap on a conventional scuba cylinder reserve valve
Peter Southwood photographed this conventional scuba cylinder reserve valve with its dust cap on January 24, 2021. The file page gives no location. It illustrates a different valve and does not show the TRIMIX fill connector or a cover for it.Photo: Peter Southwood · Source · CC BY-SA 4.0Original: Scuba cylinder reserve valve showing dust cap on yoke post and bursting disc insert P1240148.jpg. Wikimedia supplied smaller rendition. No crop or retouching.

Identify the opening and its exact part number before ordering a fill port cover. In a compact scuba setup, a buyer might mean the male fill plug on the cylinder assembly, the mating coupling on the fill hose, or a protective cap for a valve or regulator. A seller needs to know which one you mean and what you want the cover to do.

Use the part name from the equipment documents

The TRIMIX 8 mm Male Filling Connector listing describes one male connector. It does not list a protective cover. If that part is the one you want to protect, identify it as the male connector in your inquiry. If the exposed opening is on the other side of the connection, give the make and model of the hose or coupling instead. A photo of the intact assembly and its legible labels can help the manufacturer find the right diagram. Leave disassembly and inspection of pressurized equipment to a qualified technician.

Check what the cover is designed to protect

DAN World’s equipment care guide lists cylinder valve and regulator dust caps under separate equipment entries. The TUSA regulator manual provides an example of a cap identified with a particular opening, the first-stage regulator inlet, in its own care instructions. Ask for documentation that identifies the opening the cover protects and the situations it is designed for, such as dry storage. A cap’s fit or appearance does not establish that it seals against pressure or protects the equipment during rinsing. A suspected leak, defect or contamination needs a separate assessment by a qualified technician.

Ask for a specific part number

Use the TRIMIX connector inquiry if the request concerns that manufacturer’s part. Include the cylinder and fill-assembly model, the cover’s intended purpose, and whether you are replacing a documented accessory or looking for one for the first time. Ask whether an approved cover is supplied, available separately, or absent for the relevant opening. If documentation is unavailable, hold the accessory purchase until the manufacturer or a qualified service provider can identify the part.

Evergreen parts guide checked November 15, 2026. The linked TRIMIX listing, TUSA PDF and DAN World guide are undated.

Join the discussion

Share a question or a useful experience about this article. Every comment is reviewed before it appears.

Leave a comment

Your name and approved comment will be public. Your email is kept private and used to manage this discussion. Commenting does not subscribe you to marketing emails. Please leave out personal or sensitive details.