Choose your setup. Request a quote in USD. Online ordering is not available.

Buying a Mini Scuba Refill Hose? Ask How Much Room It Needs to Bend

a filling whip connector and its end fitting
Peter Southwood photographed this different fill whip connection on August 16, 2016. The file page gives no location. It shows a connection type and does not show the TRIMIX hose or establish its bend radius.Photo: Peter Southwood · Source · CC0 1.0Original: DIN HP filling whip connector with bleed valve P8160039.jpg. Resized and encoded as JPEG to meet the site size limit. No crop or retouching.

Before buying a refill hose for a crowded compressor or pump setup, request the minimum bend radius and a drawing of the complete assembly. The labelled length and the connections at its ends are useful starting points. You still need enough space for the hose to approach each connection within the limits of the exact assembly. Have a qualified fill provider assess the layout before ordering.

Ask for separate dimensions

Nuvair’s 527BA-4 refill hose listing offers several finished lengths while giving minimum bend radius and outside diameter separately. It also identifies the end fittings on the assembled options. This is an example of the distinctions to ask about. The dimensions of that hose do not apply to a different manufacturer’s product.

Ask whether the quoted length includes the end fittings and whether the published bend limit depends on temperature or how the system will be used. A short rigid fitting and a flexible hose section take up different space. Note any fixed walls, outlet recesses, handles or guards that affect the approach to the connector. Send the supplier and fill provider a photograph or dimensional sketch of the intended workspace. Let them confirm the allowed layout and when a longer assembly is appropriate.

Keep the intended service on the drawing

BAUER’s filling hose technical notification distinguishes the intended gas service, operating pressure conditions and tested construction of its hose. Ask your supplier for corresponding documentation for the actual part in the quote. A bend measurement does not establish gas suitability, and matching connectors do not establish the working rating of the entire assembly. A qualified provider should verify all of those details against the source equipment and receiving cylinder.

Request the complete assembly details

The TRIMIX refill hose and oil-water separator listing describes one hose and one separator. It asks buyers to confirm both end fittings and working-pressure ratings. Use the refill accessory inquiry to request identification of the hose and a dimensional drawing, if available. Include the pump or compressor, cylinder model and any restricted space. If the manufacturer cannot document the proposed routing, defer the hose decision to the qualified fill provider.

Evergreen equipment guide checked November 16, 2026. BAUER identifies its notice as 12/2016. The Nuvair and TRIMIX pages are undated.

Join the discussion

Share a question or a useful experience about this article. Every comment is reviewed before it appears.

Leave a comment

Your name and approved comment will be public. Your email is kept private and used to manage this discussion. Commenting does not subscribe you to marketing emails. Please leave out personal or sensitive details.