Choose your setup. Request a quote in USD. Online ordering is not available.

Camera Strap or Housing Strap? Check What Stays Outside the Underwater Case

open underwater camera housing beside an olympus tg three
An Olympus TG-3 and open underwater housing photographed January 24, 2021. This archival photograph shows the separate camera and housing. It does not show the PT-059 assembly described in the guide.Photo: Peter Southwood · Source · CC BY-SA 4.0Original: Olympus TG-3 camera and underwater housing back view with back open P1240160.jpg. Source-provided 960-pixel JPEG rendition. Full framing retained. No additional edits. The photograph is shared under CC BY-SA 4.0.

A camera’s own hand strap and an underwater housing’s hand strap can belong on different parts of the setup. For the OM SYSTEM PT-059 example, the manual tells the user to remove the camera strap before loading the camera. When buying a housing or a replacement strap, ask which attachment the accessory is designed to use.

Read the two strap references separately

The PT-059 instruction manual describes a hand strap attached to the protector’s own strap ring. In the camera-preparation section, it says the camera’s hand strap must be removed because it could become trapped between the case lids and cause leakage. These are two references within one documented assembly. An accessory advertised simply as a camera strap leaves the attachment location unclear.

OM SYSTEM’s current Japanese PT-059 specification page lists a hand strap among the supplied items and identifies compatible camera models. Use the exact regional model and package list when checking a quote. A strap pictured beside another housing can illustrate the general accessory type while leaving compatibility with your own case unresolved.

Compare the attachment with the complete setup

Ask the seller to identify the housing attachment point in its own manual. Then compare the proposed strap end, adjustment arrangement and any maker-specified limitations with that point. If the housing will sit on a tray, include the tray in the question. A strap that fits through one eyelet may still have an undocumented route around another accessory.

For an older or used housing, request a photograph of the actual strap attachment and ask about damage or missing parts before choosing a replacement. Keep the original model code with the response. Avoid treating a seller’s photograph of a similar camera as proof that the housing and its strap match your equipment.

Plan the equipment handover on land

Have the provider show the complete, manufacturer-approved arrangement and point out the relevant manual sections before use. Follow the housing’s full preparation and sealing instructions. This accessory comparison does not test a seal, determine a safe activity or establish a strap load rating.

If a tray is involved, review the camera-tray fit guide. For a TRIMIX equipment inquiry, provide the camera, housing and accessory model names with the exact question you need answered. PT-059 availability or accessory compatibility through TRIMIX has not been established.

Evergreen document-based guide. Primary sources checked November 18, 2026. Exact source publication days are not stated or have not been independently established. TRIMIX has not independently tested the equipment discussed.

Join the discussion

Share a question or a useful experience about this article. Every comment is reviewed before it appears.

Leave a comment

Your name and approved comment will be public. Your email is kept private and used to manage this discussion. Commenting does not subscribe you to marketing emails. Please leave out personal or sensitive details.